POS Motherboard 16GB LPDDR4 for Fuel Forecourt Cabinet, WF-P3399, AndroidSBC, Auckland

TL;DR: POS Motherboard 16GB LPDDR4 for Fuel Forecourt Cabinet

AndroidSBC peripheral desk: printer, scanner, cash drawer and payment reader driver SDK declared production-ready serving Auckland, New Zealand. The WF-P3399 POS Android motherboard spans the dual-screen high definition POS with 4K promotion wall and eleven sister models in the WF-P series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, HDMI 2.0 plus eDP output at 4K@60Hz, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Auckland and New Zealand importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

AndroidSBC designs the WF-P POS motherboards around the peripherals that a counter already owns: the thermal printer over RS232 or USB, the barcode scanner, the cash drawer on RJ11, the customer display on a second LVDS lane, and the payment reader on USB or serial. The Auckland integrator re-uses the existing harness instead of rewiring the counter. Each production lot is burned in for 72 hours with the display, the touch panel and the printer loop running, and the serial number is logged against the test record so aan Auckland partner can trace a single board back to its run.

WF-P3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3399 (dual-screen high definition POS with 4K promotion wall) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For New Zealand importers sourcing the WF-P family, the WF-P3399-A variant is the typical configuration for the flagship store checkout plus media wall use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for New Zealand Buyers

Most Auckland buyers start with three shortlisted Chinese factories and discover that two of them are trading companies quoting a board they do not build. The sample arrives, the second batch does not match, and nobody can produce the test record.

Dual-screen is a hardware capability on the WF-P family, not a marketing line. The RK3576 and RK3568 tiers carry independent framebuffers on two lanes, so the cashier screen runs the transaction while the customer display runs its own content at its own resolution. The 9th container of WF-P boards for Auckland left the Longgang dock on September 23, 2026 carrying 71500 units, routed through the Auckland - Shanghai lane with the compliance file and the peripheral driver set already packed.

Competitive Comparison: WF-P3399 vs Competing POS Android Boards

Against the boards Auckland integrators are currently offered, the WF-P family is differentiated on four points that a checkout lane actually feels.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

Within the New Zealand market the fastest-moving segment is the smart Android terminal that replaces a cash register outright. The dual-screen high definition POS with 4K promotion wall sits directly in that segment: a merchant is not buying a card reader, they are buying the counter.

• Entry counter tier: WF-P3399 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P7602 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P3600 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

What aan Auckland integrator should take from the forecasts is that the second and third batches matter more than the first. The WF-P family is specified so the second batch is the same board.

Partner Success Story: Gulf Counter Ventures (restaurant and hotel POS integrator)

A Gulf Counter Ventures programme in the GCC hospitality segment illustrates how the WF-P family from AndroidSBC supports Auckland integrators on the ground. Gulf Counter Ventures installed 71500 WF-P boards across 52 restaurant and hotel counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Gulf Counter Ventures branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus RSM NZ conformity, all bundled into the Shenzhen source-factory shipment.

As Gulf Counter Ventures Programme Lead for GCC Hospitality explained: Gulf Counter Ventures runs Arabic and English receipt templates from the same WF-P board, and 71500 units were accepted into the Auckland hospitality group after a two-week pilot.

Field Report: flagship store checkout and media wall installation

LONGGANG, September 23, 2026 - Chu Lin, AndroidSBC field desk. The WF-P3399 shipped with staged OTA enabled, so the New Zealand team can pilot an update on ten lanes before releasing it across the estate. The WF-P3399 POS Android motherboard order for Auckland, New Zealand cleared the burn-in station on schedule and is en route via the Auckland - Shanghai lane.

The WF-P3399 dual-screen high definition POS with 4K promotion wall production lot includes the WF-P3399-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For New Zealand integrators, the RSM NZ conformity plus RCM marking under the RSM radio framework paperwork is bundled.

Filed by Chu Lin, AndroidSBC field desk, LONGGANG. New Zealand buyers keep the same RCM file as Australia and ask for a low-volume pilot before the national rollout.

WF-P3399 Application Scenarios

The WF-P3399 dual-screen high definition POS with 4K promotion wall sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3399-A configuration is the typical build for the flagship store checkout plus media wall use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3399 drives the cashier screen while the second lane carries the customer display or the promotion wall in Auckland.
• Convenience and small format stores: the WF-P3601 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P3602 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P3566 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P3288 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Auckland: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Auckland Buyers

The WF-P family is offered on distribution, integration or private-label terms, and aan Auckland partner can run more than one at a time.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Whichever track a New Zealand partner starts on, the technical deliverable is identical - the same board, the same driver set and the same compliance pack.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a dual-screen high definition POS with 4K promotion wall?

Answer: Yes. The dual-screen high definition POS with 4K promotion wall is a stock configuration on the WF-P POS Android motherboard family from AndroidSBC. All tiers are validated against the same firmware build and the same peripheral interface before shipment to Auckland.

Which silicon tiers are available in the WF-P family for New Zealand buyers?

Answer: RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527 are all in production. The RK3399 tier specified here is validated for New Zealand compliance with the same evidence pack as the rest.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: Yes, and the configuration is documented per lot. The Auckland partner receives the interface map and the validation report with the shipment, so the counter can be wired without trial and error.

What is the minimum order quantity and the sample lead time for New Zealand?

Answer: Samples ship in 1-3 days and the sample MOQ is a single board. Volume production runs on a 15-30 day lead against the frame agreement, and the price list covers tiered volume breaks.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Available on all three tracks. AndroidSBC does AOSP builds, BSP porting, custom boot animation, custom logo and pre-installed apps, with the result held as the Auckland partner reference image.

How are firmware updates delivered to a New Zealand estate after deployment?

Answer: Staged OTA with rollback ships with the board. The New Zealand partner controls the wave size and the timing, and the watchdog recovers a lane that fails mid-update.

What shipping terms does AndroidSBC support for New Zealand orders?

Answer: FOB Shenzhen, CIF and EXW terms are all supported, with export customs clearance handled at the factory. The Auckland partner chooses the Incoterm that matches its broker arrangement.

What happens if a board fails in the field in New Zealand?

Answer: Every unit is serialised against its test record. A New Zealand field failure is traced, the root cause is confirmed on the bench at Longgang, and the replacement ships against the frozen BOM.

Contact AndroidSBC: Start Your WF-P3399 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-P family. Auckland integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Auckland and New Zealand buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-P family.